Description
Our 3/4″ Carbide Hollowing Tools are great for your hollowing needs up to about 12″ deep. Each tool comes ready to go with cup style Hunter #2 cutter and T9 Torx Wrench. When worn out, tips are easy to replace, replacement tips can be found here.
Why choose our Carbide Hollowing Tools?
- Designed to be used by hand or with the Stabilizer.
- Cup style Hunter #2 carbide tips are rotatable to get a new fresh edge, and replaceable when worn out.
- Narrow profile for superior access and control – allows you to hollow longer before needing to clear out the shavings.
- Not all bent tools are created equally. Our Bent and Extreme Bent tools are designed so that the cutter is located on center with the shaft of the tool. This eliminates the rotary torque often associated with the hollowing process as long as you keep the tool rest behind the bent part of the tool .
- Designed by a woodturner for woodturners and made in our Fort Collins, Colorado shop.
Why choose Carbide? No need to sharpen, just rotate the tip for a fresh edge. The cutting edge lasts a very long time and creates a nice shaving with a clean cut. This can be both good and bad. A clean cut is easier to sand and clean up, however removing longer shavings through a small opening can be challenging.
Important note about our Carbide Hollowing Tools: Depending on the material that you are cutting, we recommend rotating the tool/cutter towards the wood anywhere between 5-15 degrees. When used straight up the carbide tips can become aggressive (especially in harder woods).
Overall Length of Tool: 19.5″ / Approximate Hollowing Depth: 12″
Don’t forget a handle. We recommend a 24″ Handle, like our Gold Super Tool Handle (included in a “Super Set”).
tom lucas –
high quality tool set.
steve j. (verified owner) –
Superb quality tools that work exceptionally well!
Anonymous –
High quality tool – excellent for hollowing large vessels.
Thorowgood Broun IV –
I bought this setup for my dad for Christmas. He was having a hard time hollowing out deep vessels and this system allowed him to reach the bottom and sides of a 10″ sphere. They even called me to get specific information about his lathe and machined a post for the Stabilizer. Thanks Trent Bosch so much for producing such high quality tools & your excellent customer service.
Don S. (verified owner) –
Works well. Out 12″ from tool rest (GOOD!!!)
Johnny Tolly –
The carbide tips cut so with ease and leaves a great finish.
Kent Harriss –
Great Tools as always!
David P. –
They are well built, very solid. The customer service is first class, and product was delivered very quickly. I plan on being a returning customer.
PAUL Z. (verified owner) –
I love my new tools from Bosch. They hollow like an overachieving termite with titanium teeth that’s had too much coffee!
Matthew C. –
I purchased this as a finishing tool for the interior walls of hollow forms. If the tool tip is tilted slightly downward and you take light cuts, it acts as a wonderful finishing tool. I combined it with Trent’s Stabilizer and Visualizer tools. It makes hollowing a very relaxing process.
Brian Patterson –
I used your tools the day after I received them. I love how solid they are. I also like how the tool can slide further down the handle if needed or locked into place at the end. Great design overall!
Matthew C. –
I LOVE this tool. Keep it on the center line of your hollow form and it will behave really nicely. You really don’t need to be aggressive at all to get a really nice finish. This tool is a terrific investment. You can’t go wrong with it.
Richard Patrick –
Like everything Trent manufactures/sells, these are top notch quality!
Tony (verified owner) –
i have only cut green wood vessels so far. they cut it like butter, i spend longer cleaning out the shavings than it takes to cut them
Byron (verified owner) –
All Trent Bosch tools and handles are top notch professional tools
Dennis S. –
Not used yet but seems to be a great product. Excellent packing and service.
R. Lar Thomas –
Very well made. Need info for replacement cutters. Fits my Tim Yoder Elbo hollower.
James R. (verified owner) –
Solid well built tools that work?
Hashim T. (verified owner) –
I have been a fan of Trent’s hollowwing tools since my first set few years ago which by the way is still going strong! The quality of material is impressive and the use of this type of carbide really fits the type of dry woods I deal with.
Dan Long (verified owner) –
Good sturdy shafts (that’s why I got the 3/4”) that cut well and considerably quicker than by hand held tools. Invaluable savings on the wear and tear to my wrists.
Eiji Fuller (verified owner) –
Very high quality the only issue I have is they turn my hands black if im not wearing gloves.
Daniel Dubois (verified owner) –
Very strong and well made.