3/4″ Carbide Hollowing Tools

(17 customer reviews)

$95.00$400.00

Our 3/4″ Carbide Hollowing Tools are great for your hollowing needs up to about 12″ deep. Each tool comes ready to go with a carbide tip. When worn out, tips are easy to replace, replacement tips can be found here.

A little bit about our Hollowing Tools: Our hollowing tools were designed by a woodturner for woodturners, not by a manufacturer who has never used a lathe before. The narrow profile of the tool near the tip provides superior clearance and control. This also allows you to hollow longer before needing to clear out the shavings, speeding up the process. Our hollowing tools do not have swivel tips to get in the way, and tips are easily replaced. Not all bent tools are created equally. Our bent hollowing tools are designed so that the cutter is located on center with the shaft of the tool. This eliminates the rotary torque often associated with the hollowing process as long as you keep the tool rest behind the bent part of the tool. Trent uses these tools to teach the hollowing process to hundreds of students each year.  Each tool is made by us in Fort Collins, Colorado USA.

These Carbide Hollowing Tools use a Hunter #2 carbide cutter.  Cutter and torx wrench included.

Overall Length of Tool: 19.5″ / Approximate Hollowing Depth: 12″

Additional information

Weight 3 lbs

17 reviews for 3/4″ Carbide Hollowing Tools

  1. tom lucas

    high quality tool set.

  2. steve j. (verified owner)

    Superb quality tools that work exceptionally well!

  3. Anonymous

    High quality tool – excellent for hollowing large vessels.

  4. Thorowgood Broun IV

    I bought this setup for my dad for Christmas. He was having a hard time hollowing out deep vessels and this system allowed him to reach the bottom and sides of a 10″ sphere. They even called me to get specific information about his lathe and machined a post for the Stabilizer. Thanks Trent Bosch so much for producing such high quality tools & your excellent customer service.

  5. Don S. (verified owner)

    Works well. Out 12″ from tool rest (GOOD!!!)

  6. Johnny Tolly

    The carbide tips cut so with ease and leaves a great finish.

  7. Kent Harriss

    Great Tools as always!

  8. David P.

    They are well built, very solid. The customer service is first class, and product was delivered very quickly. I plan on being a returning customer.

  9. PAUL Z. (verified owner)

    I love my new tools from Bosch. They hollow like an overachieving termite with titanium teeth that’s had too much coffee!

  10. Matthew C.

    I purchased this as a finishing tool for the interior walls of hollow forms. If the tool tip is tilted slightly downward and you take light cuts, it acts as a wonderful finishing tool. I combined it with Trent’s Stabilizer and Visualizer tools. It makes hollowing a very relaxing process.

  11. Brian Patterson

    I used your tools the day after I received them. I love how solid they are. I also like how the tool can slide further down the handle if needed or locked into place at the end. Great design overall!

  12. Matthew C.

    I LOVE this tool. Keep it on the center line of your hollow form and it will behave really nicely. You really don’t need to be aggressive at all to get a really nice finish. This tool is a terrific investment. You can’t go wrong with it.

  13. Richard Patrick

    Like everything Trent manufactures/sells, these are top notch quality!

  14. Tony (verified owner)

    i have only cut green wood vessels so far. they cut it like butter, i spend longer cleaning out the shavings than it takes to cut them

  15. Byron (verified owner)

    All Trent Bosch tools and handles are top notch professional tools

  16. Dennis S. 

    Not used yet but seems to be a great product. Excellent packing and service.

  17. R. Lar Thomas

    Very well made. Need info for replacement cutters. Fits my Tim Yoder Elbo hollower.

Add a review

Your email address will not be published. Required fields are marked *